Maiboroda, V.S.Dzhulii, D.Yu.Zastavskyi, K.O.2023-05-102023-05-102023Maiboroda, V. Analysis of the forces acting from the side of the magneto-abrasive tool on parts being machined during magneto-abrasive machining in conditions of the annular bath with large working gaps / Maiboroda V.S., Dzhulii D.Yu., Zastavskyi K.O. // Mechanics and Advanced Technologies. – 2023. – No. 1. – С. 49-55. – Бібліогр.: 11 назв.https://ela.kpi.ua/handle/123456789/55503Background. For effective magneto-abrasive machining (MAM) of complex-shaped parts, comprehensive information is needed on the processes that occur when the magneto-abrasive tool (MAT) contacts with the surfaces being machined. Effective magneto-abrasive machining occurs in the presence of sufficient values of the normal and tangential components of the interaction forces between the MAT and the machined surfaces and the powder mixing during machining. Previously carried out analytical studies of dynamic parameters did not take into account the real conditions of the interaction of grains and their groups with machined surfaces.enmagneto-abrasive machiningfriction forcedrag forcemagneto-abrasive toolmagnetic inductionмагнітно–абразивне обробленнясила тертясила лобового опорумагнітно–абразивний інструментмагнітна індукціяAnalysis of the forces acting from the side of the magneto-abrasive tool on parts being machined during magneto-abrasive machining in conditions of the annular bath with large working gapsАналіз сил, що діють зі сторони магнітно–абразивного інструменту на оброблювані деталі при магнітно–абразивному обробленні в умовах кільцевої ванни з великими робочими зазорамиArticlePp. 49-55https://doi.org/10.20535/2521-1943.2023.7.1.271548621.9230000-0001-6902-69280000-0002-8863-626X0000-0002-8863-626X