Перегляд за Автор "Falchenko Maksym"

Зараз показуємо 1 - 1 з 1
  • Ескіз
    ДокументВідкритий доступ
    Development of control algorithms for magnetoelectric generator with axial magnetic flux and double stator based on mathematical modeling
    (Eastern-European Journal of Enterprise Technologies, 2022) Ostroverkhov Mykola; Chumack Vadim; Falchenko Maksym; Kovalenko Mykhailo
    The object of this research is electromechanical processes in a generator with an axial magnetic flux and a double stator and an additional non-contact excitation winding operating as part of autonomous electric power systems. The power of the additional excitation system is about 2 % of the generator power. The presence of an additional non-contact winding, which is powered by direct current, makes it possible to control the generator voltage by changing the excitation current. This resolves the task to stabilize the output voltage of the generator with permanent magnets when the load and shaft speed change. This paper reports the construction of a three-dimensional field axisymmetric mathematical model of the generator under study, which has made it possible to calculate and investigate its characteristics and parameters, in particular the magnitude of magnetic induction in all structural elements. The model built takes into account the influence of finite effects, magnetic scattering fields, and the radial axial nature of the closure of the main magnetic flux and the magnetic flux of the additional excitation winding. The use of a structure with a double stator makes it possible to more efficiently utilize the usable volume of the generator and to increase its power. A mathematical model of the generator in the d-q coordinate system was built, which has made it possible to synthesize algorithms for controlling the automatic voltage stabilization system of the generator voltage under conditions of change in load and shaft speed. Control algorithms were developed on the basis of the concept of inverse dynamics problems in combination with minimizing local functionalities of instantaneous energy values, which ensures that the system is robust when changing generator parameters and that regulators are implemented in a simple way, due to the lack of differentiation operations. Based on the models built and algorithms developed, the quality of control of the generator's output voltage when the load and frequency of the generator change was investigated by modeling in the MATLAB/Simulink environment. When setting a jump in the rated load and changing the rotational speed within ±15 % of the rated value, the automatic stabilization system provides astatic voltage control at a given level of 48 V. The results can be practically used in the design of autonomous electric power systems with high energy conversion efficiency, in particular wind turbines and hydraulic units.