Статті (ВМПМ ІФФ)
Постійне посилання зібрання
У зібранні розміщено матеріали, що опубліковані або готуються до публікації в наукових журналах та збірниках.
Переглянути
Перегляд Статті (ВМПМ ІФФ) за Дата публікації
Зараз показуємо 1 - 20 з 33
Результатів на сторінці
Налаштування сортування
Документ Відкритий доступ Nanocrystallization in Iron Alloys Induced by Friction Treatment and Nitrogen Diffusion(Kluwer Academic Publishers, 2004) Yurkova, Alexandra Ivanovna; Belotsky, Aleksei Vasilevich; Byakova, Alexandra Victorovna; Podrezov, Yurii Nikolaevich; Danilenko, Mykola IvanovychДокумент Відкритий доступ Anomalous Nitrogen Solubility in Gradient Nanostructured Layer Formed in the Surface of Bulk Iron by Severe Plastic Deformation under Friction(Springer, 2006) Yurkova, Alexandra Ivanovna; Belotsky, Aleksei Vasilevich; Byakova, Alexandra VictorovnaДокумент Відкритий доступ Mechanical Behaviour of Nanostructured Iron Fabricated by Severe Plastic Deformation under Diffusion Flow of Nitrogen(Trans Tech Publications, 2006-01) Yurkova, Alexandra Ivanovna; Byakova, Alexandra Victorovna; Belots’ky, Aleksei Vasilevich; Milman, Yuliy Viktorovich; Dub, Sergey Nikolaevich; Zenji HoritaДокумент Відкритий доступ Механические свойства наноструктурного железа,полученного интенсивной пластической деформацией трением(Інститут металофізики ім. Г. В. Курдюмова НАН України, 2009) Юркова, Александра Ивановна; Белоцкий, Алексей Васильевич; Бякова, Александра Викторовна; Мильман, Юлий Викторович; НТУУ «КПІ»; Институт проблем материаловедения им.И.Н.Францевича НАН УкраиныДокумент Відкритий доступ Структура и механические свойства железа после поверхностной интенсивной пластической деформации трением. І. Ообенности формирования структуры(Наука и технологии, 2009) Юркова, Александра Ивановна; Мильман, Юлий Викторович; Бякова, Александра ВикторовнаДокумент Відкритий доступ Структура и механические свойства железа после поверхностной интенсивной пластической деформации трением. II. Механические свойства нано- и субмикрокристаллического железа(Наука и технологии, 2009) Юркова, Александра Ивановна; Мильман, Юлий Викторович; Бякова, Александра ВикторовнаДокумент Відкритий доступ Механiчнi властивостi ОЦК залiза, одержаного iнтенсивною пластичною деформацiєю тертям(Академперіодика, 2009) Юркова, Олександра Іванівна; Мілман, Юлій Вікторович; Бякова, Олександра ВікторівнаДокумент Відкритий доступ Structure and Mechanical Properties of Iron Subjected to Surface Severe Plastic Deformation by Friction: I. Structure Formation(Pleiades Publishing, Ltd., 2010) Yurkova, Alexandra Ivanovna; Milman, Yulyi Victorovich; Byakova, Alexandra VictorovnaДокумент Відкритий доступ Structure and Mechanical Properties of Iron Subjected to Surface Severe Plastic Deformation by Attrition: II. Mechanical Properties of Nano and Submicrocrystalline Iron(Pleiades Publishing, Ltd., 2010) Yurkova, Alexandra Ivanovna; Milman, Yulyi Victorovich; Byakova, Alexandra VictorovnaДокумент Відкритий доступ Особливості формування нанокристалічної структури в α-залізі при деформації тертям(Фізико-технологічний інститут металів та сплавів НАН України, 2010-03) Юркова, Олександра Іванівна; Карпов, Руслан Вікторович; Клягін, Євген Олександрович; Yurkova, Alexandra Ivanovna; Karpov, R. V.; Klyagin, E. O.Документ Відкритий доступ Структура и механические свойства железа после поверхностной интенсивной пластической деформации трением с одновременным насыщением азотом. І. Особенности формирования структуры(Наука и технологии, 2011) Юркова, Александра Ивановна; Мильман, Юлий Викторович; Бякова, Александра ВикторовнаДокумент Відкритий доступ Cold-spray Technique as Efficient Alternative Process for Consolidation of Powdered Al Fe-Cr alloys Reinforced by Nanoquasicrystalline Particles(Sumy State University, 2011-09) Yurkova, Alexandra Ivanovna; Byakova, Alexandra Victorovna; Cherednichanko, Vladislav Victorovsch; Sirko, Alexandr IvanovichДокумент Відкритий доступ Structure and Mechanical Properties of Iron after Surface Severe Plastic Deformation under Friction with Simultaneous Nitrogen Saturation: II. The Mechanical Properties of Nano and Submicrocrystalline Iron Saturated with Nitrogen during Deformation(Pleiades Publishing, Ltd., 2012) Yurkova, Alexandra Ivanovna; Milman, Yulyi Victorovich; Byakova, Alexandra VictorovnaДокумент Відкритий доступ Зносостійкі композиційні матеріали за участю відходів твердих сплавів і самофлюсівних сплавів на основі заліза(НАУ-друк, 2012) Степанчук, Анатолій Миколайович; Шевчук, Максим Борисович; Stepanchuk, A. N.; Shevchuk, M. B.; Степанчук, А. Н.; Шевчук, М. Б.Документ Відкритий доступ Структуроутворення при взаємодії РЕЛІТу з розплавами сомофлюсівних сплавів на основі заліза(Фізико-технічний інститут металів та сплавів НАНУ, 2012) Степанчук, Анатолій Миколайович; Шевчук, Максим Борисович; Бірюкович, Ліна ОлегівнаДокумент Відкритий доступ Триботехнічні властивості матеріалів на основі дисперсно зміцненої міді(НАУ-друк, 2012) Степанчук, А. М.; Богатов, О. С.; Шимків, М. В.Документ Відкритий доступ Structure and Mechanical Properties of Iron after Surface Severe Plastic Deformation under Friction with Simultaneous Nitrogen Saturation: I. Structure Formation(Pleiades Publishing, Ltd., 2012) Yurkova, Alexandra Ivanovna; Milman, Yulyi Victorovich; Byakova, Alexandra VictorovnaДокумент Відкритий доступ Effect of the cooling rate during melt solidification on the structure and properties of WC-W2C(Springer Nature, 2014) Trosnikova, I. Yu.; Loboda, P. I.; Karasevska, O. P.; Bilyi, O. I.By optical and scanning electron microscopy and quantitative X-ray diffraction and X-ray analysis revealed that the increase in the rate of cooling during crystallization from the melt leads to a reduction in the size of the phase components of the alloy of 20 wt.% WC-80 wt.% W2C, increased compressive stress in the matrix phase W2C and stretching inclusions in the WC, which leads to an increase in the hardness of 1.5 times and 2-4 times the strength of relit, that is used on an industrial scale for the strengthening of machine parts and mechanisms operating in abrasive wear and high contact loads.Документ Відкритий доступ Структура та фазовий склад високоентропійного AlCuNiFeTi сплаву, отриманого методом механічного легування(2014) Юркова, Олександра Іванівна; Чернявский, Вадим Вікторович; Романенко, Юрій Миколайович; НТУУ «КПІ»Документ Відкритий доступ Effect of Molybdenum Additions on the Microstructure and Properties of WC-W2C Alloys(Springer Nature, 2014-07) Trosnikova, I. Y.; Loboda, P. I.; Bilyi, O. I.The paper examines how additions of 5, 10, and 20 wt.% molybdenum influence the structure, stress–strain state, phase composition, and size of phase components in WC–W2C alloys. It is found that 5 wt.% molybdenum leads to 30% increase in the microhardness and twofold to threefold increase in the wear resistance of cast tungsten carbide compared to the alloy without additions. Higher molybdenum content of the WC–W2C alloys changes the phase composition and increases compressive stresses in the W2C matrix phase and tensile stresses in WC, (Mo, W)2C, and Mo2C inclusions.