Design and Technological Support for the Production of the "Jaw" Part
Вантажиться...
Дата
2023
Автори
Науковий керівник
Назва журналу
Номер ISSN
Назва тому
Видавець
Igor Sikorsky Kyiv Polytechnic Institute
Анотація
The explanatory note for my bachelor's diploma project titled "Design and
Technological Provision of Jaw Part Manufacturing" comprises of 70 A4-size pages
and includes 33 illustrations, 19 tables, and 3 appendices. These appendices present
the processing routes and operations, and the control program code for the CNC
machine. Throughout the project, I have referenced 59 literature sources, including
manuals, guides, handbooks, catalogs, standards, articles, and scientific research.
The graphical part of the project consists of 8 A1-size sheets, showcasing various
aspects such as the static study results, detailed drawings, 3D representations of the
part and the workpiece, graphical depictions of the technological transitions, and
their visualization in the CAM system. Furthermore, assembly drawings of the
machine devices and technological transition schemes for two operations are
included.
Within the diploma project, I have addressed the following aspects:
• I explored the issue of deformation of the workpiece when machining.
• I proposed an alternative solution to a specific problem, highlighting its
advantages and drawbacks.
• I designed a 3D model of the jaw part and provided its detailed drawings.
• I conducted an analysis of the part's functional purpose and working
conditions within the assembly.
• I performed a brief analysis of the manufacturability of the part's design.
• I selected the appropriate method for manufacturing the workpiece,
developed a 3D model of the workpiece, and created its detailed drawings.
• I justified the selection of technological foundations for all the operations
within the manufacturing process.
• I devised the operational technological process for manufacturing the jaw
part.
• I determined the required allowances for all the machined surfaces of the
workpiece.
• I standardized the technological operations for producing the part.
• I developed the necessary technological documentation, including
processing routes, and operations.
• I designed the construction of the machine device and its 3D model,
conducting all the necessary calculations to determine the required clamping
force.
• I calculated the manufacturing cost of the part.
The attached annex pages at the end of the diploma project include a comprehensive
report of the static study conducted on the jaw part using Fusion 360. The study4
focused on assessing the structural weaknesses of the part during the drilling of
tapped countersunk holes F5 and F6. The study report provides valuable insights
into the deformations that occurred and their visual representations.
This diploma project aims to showcase the extensive research, design, and
technological considerations involved in the manufacturing process of the jaw part.
It presents a comprehensive analysis of various aspects, along with practical
solutions and innovative approaches
Опис
Ключові слова
Jaw
Бібліографічний опис
Zyad Hakim. Design and Technological Support for the Production of the "Jaw" Part : diploma project for a bachelor's degree : 131 Applied mechanics / Zyad Hakim. – Kyiv, 2023. – 74 с.