Manufacturing Process Planning for the Part "Bearing Support"

Вантажиться...
Ескіз

Дата

2023

Науковий керівник

Назва журналу

Номер ISSN

Назва тому

Видавець

Igor Sikorsky Kyiv Polytechnic Institute

Анотація

Bachelor's thesis on the topic “Manufacturing Process Planning for the Part "Bearing Support"”. It consists of 104 sheets of A4 format and contains 48 figures and 4 tables. The purpose of this work is to develop the process of manufacturing the "Bearing Support" part. The first chapter is devoted to calculation of workpiece deformations. The sequence of the production process was developed, including the selection of CNC machines, cutting tools, cutting conditions, etc. For two specific production processes, the fixture was selected and the corresponding settings were developed. Economic calculations for the first plant have been carried out. The graphic part consists of 6 sheets of Al format, as follows: 1. Calculation of workpiece deformations 2. Drawings and 3D models of the "Bearing Support" part and blank 3. Manufacturing operation presentation 4. Fixture setup for the 1st manufacturing operation 5. Fixture setup for the last manufacturing operation 6. Results of CNC code development

Опис

Ключові слова

Bearing Support

Бібліографічний опис

Abdultawaab Suleiman Hassan. Manufacturing Process Planning for the Part "Bearing Support" : diploma project for a bachelor's degree : 131 Applied mechanics / Abdultawaab Suleiman Hassan. – Kyiv, 2023. – 104 с.

DOI