Manufacturing Process Planning for the Part "Locking key"
Вантажиться...
Дата
2024
Автори
Науковий керівник
Назва журналу
Номер ISSN
Назва тому
Видавець
Igor Sikorsky Kyiv Polytechnic Institute
Анотація
Bachelor's thesis on the topic “Manufacturing Process Planning for the Part “Locking key””. It consists of 60 sheets of A4 format and contains 27 figures and 10 tables.
The purpose of this work is to develop the process of manufacturing the "Locking key" part. The first chapter is devoted to the optimization of hole boring. The sequence of the production process was developed, including the selection of CNC machines, cutting tools, cutting conditions, etc. For all specific production processes, the fixture was selected and the corresponding settings were developed. Economic calculations for production scaling were carried out.
The graphic part consists of 6 sheets of Al format, as follows:
1. Optimization of the hole boring process
2. Drawings and 3D models of the “Locking key” part and blank
3. Manufacturing operation presentation
3. Manufacturing operation presentation
4. Fixture setup for the 1st manufacturing operation
5. Fixture setup for the 2st manufacturing operation
6. Fixture setup for the last manufacturing operation
Опис
Ключові слова
Бібліографічний опис
Ferhat Ari. Manufacturing Process Planning for the Part "Locking key" : diploma project for a bachelor's degree : 131 Applied mechanics / Ferhat Ari. – Kyiv, 2024. – 72 p.